Yamaha FG-110E Natural 1970s

Description

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please call to speak to one of our experts.
Summary
Finish Details: Original
Top Material: Spruce Top
Body Material: Maple Body
Body Details: Maple back and sides with spruce top.
Neck Material: Mahogany Neck
Fingerboard Material: Rosewood
Neck Profile: medium “C”
Neck Thickness (IN): 1st- .86″ 12th- .97″
Fingerboard Radius: 16.00″ to
Nut Width: 1-11/16″
Scale Length: 25
Neck Details: Mahogany neck with a rosewood board, center dot pearloid inlays, truss adjustment at the headstock. — The neck has been reset
Electronics: Original pickup and original volume and tone controls.
Pickup Measurements: 2.3k ohms
Hardware: The hardware is all original except for the replaced bone saddle and bridge pins.
Weight: 3 lbs 3 oz
Modifications/Repairs: Non-original bone saddle — The bridge pins are not original — The bridge appears to have been shaved down slightly to accommodate a low neck angle. — The neck has been reset
Case Details: Chip board case.
Cosmetic Condition: The guitar has moderate play wear. The finish is glossy with dents and scratches throughout. The back of the body has considerable buckle rash. The metal hardware is nicely tarnished with age.
Tech Notes: Currently, setup with 12-gauge phosphor bronze strings and low action. The truss rod has limited adjustability but is holding the neck with optimal relief.