Dobro Resonator Sunburst 1930s

Description

The following specs were carefully collected and recorded by a skilled technician. For a more detailed description and questions regarding sound, feel, or cosmetic condition, please call to speak to one of our experts.
Summary
Finish Details: Original finish except for possible over-spray on the back of the neck.
Top Material: Maple Top
Body Material: Maple Body
Body Details: Laminate maple resonator body with biscuit resonator cone.
Neck Material: Maple Neck
Fingerboard Material: Ebony Fingerboard
Neck Profile: medium/large “V”
Neck Thickness (IN): 1st- .96″ 10th- 1.10″
Fingerboard Radius: 20.00″
Nut Width: 1-11/16″
Scale Length: 25″
Neck Details: One piece maple neck with unbound ebony board.
Electronics: A non original vintage DeArmond pickup with volume and tone control unit has been installed.
Pickup Measurements: 10.6k ohms
Hardware: The hardware is all original except for the replaced endpin and all the electronics parts.
Weight: 5 lbs 5 oz
Modifications/Repairs: -A non original vintage DeArmond pickup with volume and tone control unit has been installed. The body was routed for the pickup and four holes were drilled for the control unit. An output jack plate has been installed on the side of the lower bout. -The neck has been reset. The last couple of frets were removed to leave room for the pickup.
Case Details: Original chip board case.
Cosmetic Condition: The guitar has heavy play wear. The metal hardware is nicely tarnished with age.
Tech Notes: -The guitar is set up for slide playing and open tunings. The frets are small with heavy play wear.